There are plenty of suggestions and rules when it comes to sewing with knits, but one thing that doesn’t always get talked about in sewing instructions are the importance of stabilizing the shoulder seam. Yes this step might not make or break a garment, but it does make a huge difference when it comes to keep the shoulder seam in check. And if you look at even the cheapest ready to wear t-shirt, there is always some sort of shoulder stabilizer in place.
The most common options for shoulder stabilization are:
- A piece of self fabric cut lengthwise (the direction that have the least amount of stretch)
- Fusible interfacing
- Shoulder seam band (which can be quite rigid as they don’t tend to have much stretch)
- Clear elastic
Of these options I use clear elastic the most. Why you may ask? Well for a couple of reasons. One is that the elastic is so thin that it doesn’t create much bulk if any. Another reason is that it is so discrete due to its transparent nature (obviously!). A third reason is it that elastic really keeps its shape, even when stretched out. As for drawbacks, the main are that it can be tricky to sew, as it can slip or get stuck to the presser foot, so this method does take some practice.
So let’s take a look on how I used clear elastic for the shoulder seam on my cardigan:
Since my cardigan fabric stretches the minute it leaves the cutting table I used the pattern piece as my guide. Then with a pencil I marked the corresponding notches on the elastic.
Step 2. Prepare the elastic so it won’t slip
Here are a few suggestions:
- Attach the elastic to the fabric with a few zigzag stitches at the start of the seam before sewing the shoulder seam with a serger (on the back piece, see below). A little hand stitching will also do.
- Use glue stick to keep the elastic in place
- Don’t cut the elastic before sewing, instead leave plenty of extra so that you can hold the elastic while sewing
- If all else fails, use a teflon coated presser foot, it will keep it from sticking.
The elastic should be attached on the back bodice piece, so that when you press the shoulder seam to the back you won’t see or feel the elastic. Hold the elastic to keep in place while sewing, but do not stretch.