Brother CV3550 Coverstitch: First impressions review

- Coverstitch, Tools

Brother CV3550 Coverstitch review

The Brother CV3550 is one of the first top cover stitch machines for the domestic market. Now what is a top cover you might ask? Well, it’s a stitch that looks like this:

Brother CV3550 Coverstitch review

If you take a closer look at many RTW knit garments, especially activewear, you will see that this stitch is very common on hems. The top cover stitch is on the top and on the reverse side there is a regular 3-needle coverstitch seam. I was able to borrow this machine from a friend for research purposes when writing my upcoming coverstitch book. So this CV3550 review is only meant as a first impression look at the machine, I wasn’t able to use it enough to be able to write an extensive review.


Brother CV3550 Coverstitch review

Threading: This machines use up to five threads and can do all a regular 3-needle coverstitch machine can do, plus a 4-thread (wide and narrow) and 5 thread top cover stitch. So you get three more stitches compared to a regular coverstitch machine. I found the threading to be more of a hassle compared to my Janome Coverpro, especially when using the top cover attachment. You really have to be meticulous to get it right


5 thread top cover stitch.


4-thread narrow


 4-thread wide (these samples are not 100% perfect since I was not able to fine tune my skills)


Brother CV3550 Coverstitch review

The top cover attachment. The top looper thread is stitched using a removable attachment that moves back and forth when sewing. If you remove the attachment, the Brother CV3550 is just like a regular coverstitch machine. Getting the top looper thread to stay put in the slot was a struggle, however, this machine has a learning curve for sure! You really need to align the thread properly to make this work.


When it doesn’t work you’ll get an uneven seam, as you can see in the photo. That said, all Brother CV3550 users that I have talked to say that after some practice, this problem goes away. So this is just about being patient and learn the proper techniques.


Chain off. The Brother 3550 can sew a chain off stitch just like a serger, love love love this feature!


Brother CV3550 Coverstitch review

The top looper thread. This is the part that is tricky to master when you are starting out. You really need to place the thread right before sewing, plus the manual recommends starting with the regular 3-needle coverstitch and then add the top cover thread.


Brother CV3550 Coverstitch review

The lower lever moves back and forth forming the top cover stitch. Once you get it right it will sew this seam without hassle.


Pros and cons of the Brother CV3550


  • You get a lot of stitches (3 more than a regular 3-needle coverstitch)
  • It comes with a clear presser foot, which is awesome. This should really be the standard on all coverstitch machines.
  • I can totally see myself getting one in the future! I love the stitch and when my friend (and owner of the machine) demonstrated it to me, she managed to get a beautiful stitch, So all problems I encountered are related to me not fully being used to the machine.
  • The price is around the same compared to similar regular coverstitch machines, so it does seem like a good value to me. For comparison, see Brother CV3550  vs Juki MCS-1500 (Brother is currently cheaper), at least on (Amazon affiliate links).


  • The top-cover set-up is more cumbersome to learn, thread and use compared to regular coverstitch stitches. I wish they had made it a bit easier, but perhaps future models will have improved in this area?
  • I would not label this as a beginner coverstitch machine, as there are even more variables that can go wrong compared to a regular coverstitch machine. I think it is important to understand the coverstitch basics before moving on to this machine. That said it can be used without the top cover attachment which makes it easier to use that way. Plus if you are one of those people who are patient and actually read the manual thoroughly before sewing, then this machine could be suitable, even if you are new to coverstitching. But let’s be real, most people don’t 🙂
  • The presser foot is a bit low compared to other coverstitch machines I’ve used. This could make sewing over thicker layers an issue.

Have you tried it and what did you think?

Previous Story
Next Story

You Might Also Like


  • Reply
    Cecilia Nilsson
    August 22, 2018 at 11:17 am

    Before watching your youtube channel and reading your blog, I never even knew such a thing as a CoverStitch machine existed. I was instantly impressed though so started investigating the possibilities and soon came across this machine. In any comparison I made, it came up as best value given the price (around 1500 Eur) and the capabilities with that extra top seam so I ordered it despite never having used a coverstitch at all but being a confident sewer and serger user. I found that with the help of youtube tutorials and the manual, I found it very easy to thread, yes the attachment is a bit tricky but not too bad, I much prefer threading this machine to a serger. I’ve played around a bit but have a lot of learning to do still (so am really looking forward to your book), even so my seams are nice and even. I do use a “leader/ender” piece of fabric when I have found a setting where the stitches look beautiful as that helps in the sewing, especially with the top seam. I would certainly recommend this machine to a beginner coverstitch user (with experience in sewing), as very soon you would want to upgrade to one of these and the price difference really isn’t that great.

    • Reply
      August 22, 2018 at 10:02 pm

      Thank you for sharing your beginner perspective on this machine, I might have to change my stance on whether I would label this a beginner machine or not 🙂 And you bring up a good point about this machine being something that one would want to upgrade to eventually, the next one I buy will have to have this feature for sure!

  • Reply
    August 25, 2018 at 9:30 pm

    I love that chain off feature! Does it also work with the regular cover-stitch stitches? I have an Elna 444 (Janome clone) and I’m not thrilled with it. In fact, I came to your blog to read up on different cover-stitch machines today because mine was repeatedly skipping stitches on the bottom looper while I was sewing a cotton/lycra tee shirt this morning – ggrrrrr!

  • Reply
    Nancy Karpen
    September 8, 2018 at 7:33 pm

    A friend who sews a lot of athletic wear bought one of these. I am not sure that I would really make use of the top coverstitch. Though I’ve got to say that the chain off feature is very tempting!

  • Reply
    September 20, 2018 at 6:43 pm

    Can you adjust the presser foot height/pressure with that knob on top, perhaps?

  • Reply
    Linda Hinds
    September 28, 2018 at 2:09 pm

    I’m really struggling to decide between the Janome coverpro 200 and the brother cv3550, is it worth an extra £140 to get the top stitch? Or can I just use the flip side of the 3thread on the janome?

  • Leave a Reply